Photovoltaic Modules

MODELs and types of Photovoltaic Modules:

IS10P, IS20P, IS30P, IS40P and IS50P photovoltaic modules are composed of 36 high efficiency polycrystalline cells, manufactured with the most innovative technologies of isotropic texturization and antireflecting coating.

Encapsulation of cells is made between a high-transmission tempered glass and a plastic. The encapsulant in Ethylene Vinyl Acetate (EVA) covers the photovoltaics cells within the laminate thus protecting them from etching. The texturization of the glass enables a maximum concentration and diffusion of the light on the solar cells.

This allows us to guarantee a high performance, power and working capability even in lower sunlight conditions. The Tedlar backside contributes to a further protection of the module against the action of climatic agents like humidity and dust, and provides a total electrical isolation.

Download PDF

PRODUCT CHARACTERISTICS

  • Los módulos IS10P, IS20P, IS30P, IS40P y IS50P utilizan un marco de aluminio anodizado transparente y reforzado, altamente resistente a las condiciones marítimas.
  • IS10P, IS20P, IS30P, IS40P and IS50P modules use an anodized transparent and reinforced aluminium frame, highly resistant to marine conditions
  • IP 65 watertightness degree. The modules are totally sealed to prevent water ingress
  • Certifications:
  • TÜV 11-PPV-0000108/05-W02-TIC.
  • CEI/EN 61215 Ed. 2.
  • CEI/EN 61730 1-2 (2007).
  • High performance, even under low sunlight levels.
  • Maximum concentration and diffusion of light on the solar cells.
  • Cell protection through EVA encapsulation.
  • Tedlar coating for a further protection of the module against humidity and dust, providing a total electrical isolation.
  • IP 65 Tyco waterproof junction box (fitted with 2 nos. by-pass diodes on IS50P modules).

IS75P, IS95P, IS120P and IS150P photovoltaic modules are composed of 36 high efficiency polycrystalline cells, manufactured with the most innovative technologies of isotropic texturization and antireflecting coating.

Encapsulation of cells is made between a high-transmission tempered glass and a plastic. The encapsulant in Ethylene Vinyl Acetate (EVA) covers the photovoltaics cells within the laminate thus protecting them from etching. The texturization of the glass enables a maximum concentration and diffusion of the light on the solar cells.

This allows us to guarantee a high performance, power and working capability even in lower sunlight conditions. The Tedlar backside contributes to a further protection of the module against the action of climatic agents like humidity and dust, and provides a total electrical isolation.

Download PDF

PRODUCT CHARACTERISTICS

  • IS75P, IS95P, IS120P and IS150P use a pre-holed transparent reinforced anodized aluminium frame, providing an easy installation of the module.
  • IP 65 watertightness degree. The modules are totally sealed to prevent water ingress.
  • Certifications:
  • TÜV 11-PPV-0000108/05-W02-TIC.
  • CEI/EN 61215 Ed. 2.
  • CEI/EN 61730 1-2 (2007).
  • High performance, even under low sunlight levels.
  • Maximum concentration and diffusion of light on the solar cells.
  • Cell protection through EVA encapsulation.
  • Tedlar coating for a further protection of the module against humidity and dust, providing a total electrical isolation.
  • IP 65 Tyco waterproof junction box fitted with 2 nos. by-pass diodes